#FlipConAus – Review Day One Part Two

I don’t want my videos to be videos; I want them to be lessons”
-Joel Speranza

In part one of my FlipConAus Review, I began exploring the learning from the FlipConAus Pre-Conference workshop I attended, which was led by Joel Speranza (@JoelBSperanza). This article will finish that,and set the stage for Day Two of FlipConAus. I closed out Part One with Joel’s video cheat sheet and a brief look at some video analytics. After Joel finished talking to us about tips for video creation, we moved on to a general discussion around the various tools that can be utilised for the purpose of flipping a classroom.

Joel posits that there are five categories of tools critical for flipped learning:

  1. Presentation surface
  2. Capture device / software
  3. Video hosting
  4. Interactive video tools and lastly, a
  5. Learning Management System (LMS)

Here are some options for software to help you in a #flippedclass #flippedlearning #flipconaus #flipconaus15

A post shared by Brendan Mitchell (@c21_teaching) on

Joel indicated that having a formative diagnostic and feedback system within the flipped system (differentiated from your normal processes) and / or subject specific websites and programs are optional, but will enhance your flipping. Joel also indicated that if you want to compare tools in a particular category against others in the same category, then Googling X vs  (where X represents the name of one of the tool options you want to compare) will bring up a comparison of that tool with its direct competitors.

Presentation Surface
This can be anything from your current tools including whiteboard/blackboard, butcher’s paper, workbooks etc, as long as you can capture what is being done in some way.

Capture device / software
There is such a huge range of options here, from a webcam, your smart phone or tablet, a DSLR camera, camcorder etc in regards to the device, and software also sees a plethora of options from my personal tool of choice (Camtasia), to screen-cast-o-matic and a number of others. Guido Gautsch (@gheedough) has put together a useful article that covers some of the various options (both hardware and software) in more depth than I can include here.

Video Hosting
This , typically, is either YouTube, TeacherTube or Vimeo. Unfortunately, those three sites are all blocked for State schools in NSW and in many other regions both domestically and internationally, making video hosting and then access problematic. Some options to get around the blocks include MyEdApp with their proxy, iTunesU where you can upload the video file directly into the course for students to download onto their device (which has other inherent issues), and the trusty USB or DVD. Some schools utilise the internal server for hosting which is fine for accessing at school, but problematic for access otherwise. If you have come across another video hosting option, particularly one that bypasses general blocks, please let me know in the comments section.

Interactive Video Tools
Again, this is an area that has a vast array of options, and I would encourage you to explore them for yourself and determine which ones you like. Some of the tools that we discussed included EduCannon, Zaption and EdPuzzle.

Another area with an array of options, including super low-tech (using a workbook) to high tech using tools such as GClass, Edmodo, MyEdApp, or Moodle. This is another area in which you will need to do some exploration and testing to decide what your preference is.

This discussion of the various tools available to use with flipping led to a discussion around workflow, or the process by which you flip a lesson and Joel showed us a rough sketch of his own workflow:

This is screen-capped from Joel's presentation and is his rough sketch of his own workflow when flipping his mathematics classes.
This is screen-capped from Joel’s presentation and is his rough sketch of his own workflow when flipping his mathematics classes.

This takes each of the categories of tools, and arranges them in order of use for the workflow and is designed to help you crystallised exactly what you need to use for your specific context. He then asked us to consider this image:

Image screen-capped from Joel's presentation.
Image screen-capped from Joel’s presentation.

Joel’s contention was that when deciding what tools you planned to use in your flipping, that you limit the number of tools that the students were expected to have the ability to use to the school standard plus two additional tools. For example, if your school is a Google Apps for Education school, then your students would already have the expertise to utilise those apps, and you only be adding, at most, two further websites requiring expertise. Joel’s theory here is that by keeping the technical skills needed to manageable limits that we increase the ability of our students to master using the tools that we require them to use, resulting in a higher probability of engagement with the tools and the learning. You will notice in Joel’s image that the list of tools requiring teacher expertise is substantial relative to the other two columns. This is deliberate, and reflective of the processes involved in presenting, recording, hosting and delivering the flipped learning lesson.

Joel also indicated that he has on occasion allowed students to demonstrate their learning using the tools in the workflow. For example, allowing students to create a ‘bulb’ within EduCannon as the process of creating the bulb requires students to have the conceptual understanding of the topic, in order to create not only their video, but also the interactive elements, with conceptual accuracy.

We then entered a discussion around Flipped Learning experts. Joel reminded us of the research popularised by Malcolm Gladwell in his book Outliers indicating that it takes around ten thousand hours of focused practice to master something indicating that there has not been enough time for anyone to be considered an expert flipper. The point here is to remind us that flipping a new craft, and thus has only limited research behind us, and that as the leaders in flipping, in time as there is a greater weight of research and pedagogical practice behind flipping, that we will be considered poor flippers. This was not meant to be discouraging, and Joel likened it to the advent of the chalkboard.

The chalkboard has been around, as a pedagogical tool for approximately two hundred years, and has a vast amount of research and pedagogical experience behind it to help us know what good use of a blackboard looks like (which I think transfers naturally to a whiteboard). Teachers in the mid-twentieth century were better teachers when it came to utilising the blackboard then the pioneers who first used it as they had the experience of their forebears to learn from, bring this famous quote to mind:

Retrieved from http://www.injoewetrust.com.au/2015/09/14/standing-on-the-shoulders-of-giants/ on 2/11/15

We are making the mistakes in flipping that our descendants will (hopefully) not make, as they will have learnt from our experience; we are setting the stage for them to use flipping as a pedagogical tool in better ways than we are able to currently with our dearth of experience and research to guide us. This is an important point I believe. It seems to be forgotten (or perhaps just not made explicit?) that when you are leading the way in a field, that you only have a limited amount of experience and mistakes from predecessors to guide you, and that it is in fact you who are making the mistakes for others to learn from. As early adopters of flipped learning, we will be the giants upon whose shoulders others will stand.

Joel closed with a critical discussion focused on questioning the norms around why things are done the way they are; why do we do what we do? We began by talking briefly about classroom layouts, and quickly moved on to schooling norms such as two straight lines outside the class before going in, how we move around the school etc, with some discussion around what people do differently, before moving onto the focus question for this segment, which is how do we make learning goals clear in a flipped class? Typically, in a traditional learning session, students are told up front what they will be learning and why, but doing this in a video is not necessarily a normal process yet.

Ideas discussed included having the goal appear on screen, either consistently throughout the video, or at intervals, verbalising it as you traditionally would or some combination thereof. Joel indicated that he asks his students to “write down your goal and do it” or, if not the goal, then the learning focus. This led to a discussion of how we can utilise the what does success look like? as a strong differentiation tool when flipping, and what motivates people. The final comment was that everyone learns differently. This means we need to teach differently. Flipped learning as a pedagogical practice enables us to do this.

The below video is an amusing scene from West Wing and encapsulates common feelings about change quite nicely. Joel showed us this while talking about the fear of change that some people have and the common question of “why do I need to change?”

Thank you for reading. The next article will begin looking at the conference proper, which began with a keynote address from Jon Bergmann and Aaron Sams.

7 thoughts on “#FlipConAus – Review Day One Part Two

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s